[microsvc]

I recently installed a larger drive in my 1000 (320gB) and it worked well. Over the past few days, it became unaccessible. Here's a few lines from my logs:

E File System Check : FSCK fatal error = 4 Disk 10000 7/24/2010 1:56:04 PM
E File System Check : Cannot Read: Blk 82304 Disk 10000 7/24/2010 1:56:04 PM
I File System Check : ** Phase 1 - Check blocks and sizes Disk 10000 7/24/2010 1:55:23 PM
I File System Check : partition is clean. Disk 10000 7/24/2010 1:55:22 PM
I File System Check : Executing fsck /dev/ride0a /force Disk 10000 7/24/2010 1:55:22 PM


Does fatal error 4 mean the drive has failed? The disk activity LED is on a lot.

Thanks. ~Bob