Pro/Forums - View Single Post - Snap 1000 Error

microsvc · 07-31-2010, 01:22 PM

Bitor, The drive that gave me issues is a Maxtor MaXLine II 320gB ATA/133. I chose this one because it was advertised to have 16mb of memory. Further research showed it to have 2mb memory (and runs at 5400rpm), which may explain some of the issues I had (based on your comments). I put the drive on a USB cable and Windows recognized it and formatted it to 301gb. Looks like the drive "may" be good, just didn't have the ram on board for the Snap OS. Comments?

The 160gb I installed is a 7200rpm model and has 8mb on board and formatted quickly. I'm hopeful.

~bOb

07-31-2010, 01:22 PM	#10
microsvc Cooling Neophyte Join Date: Jun 2010 Location: Oklahoma Posts: 15	Re: Snap 1000 Error - no access Bitor, The drive that gave me issues is a Maxtor MaXLine II 320gB ATA/133. I chose this one because it was advertised to have 16mb of memory. Further research showed it to have 2mb memory (and runs at 5400rpm), which may explain some of the issues I had (based on your comments). I put the drive on a USB cable and Windows recognized it and formatted it to 301gb. Looks like the drive "may" be good, just didn't have the ram on board for the Snap OS. Comments? The 160gb I installed is a 7200rpm model and has 8mb on board and formatted quickly. I'm hopeful. ~bOb