Re: Snap 1000 Error - no access
Quote:
Originally Posted by bitor
This is directed to microsvc and no one else.
I just noticed that it's a ATA/133Mhz. That's not good. I've had no luck in a Snap1000 with most ATA/133Mhz speed hard drive. I try to only use ATA/100Mhz on my Snap1000 because of this.
|
BS, it just means you have configured the drives wrong with most of the ATA133 drives you have used.
Quote:
Originally Posted by bitor
This is directed to blue68f100 and no one else
I talked with an Adaptec tech. a while back and he said
|
My experience has been that when it comes to the Snap OS units, David often knows more than the "adaptec techs" do.
__________________
~
6 x Snap 4400 (SATA Converted)
2 x Snap 4500 (SATA Converted)
1 x Snap 110
5 x Snap 410
3 x Snap 520
2 x Sanbloc S50
Drives from 250GB to 2TB (PATA, SATA, and SAS)
GOS v5.2.067
All subject to change, day by day......
|