Re: My 4500 doesn't respond to the power control switch
Hello LarryInCa,
Not for sure what it could be exactly. It could be your power supply is weak/strained/going bad which I think may be the case. Do you hear the drives spin up as you power up the server? Anyway, something to consider as you trouble shoot.
bitor
Quote:
Originally Posted by LarryInCa
Same server, different problem 
I can't get my 4500 server to wake back up after powering it down. The last action I took was to go into the GUI and shut it down, as I needed to move the box.
After plugging it back in, nothing happened while pressing the power button
Tried swapping power cords, but no change. The green led on the PS blinks when I plug it back in, and the MB has a green LED in the center that lights. Remove the cord and both of the LED's go out.
I checked all of the internal plugs to make sure they were seated, and they were. I unplugged and replugged the ribbon cable that goes to the power switch / led PCB. I pulled the CMOS battery, and replaced it. I pulled the PS and reseated it.
No change.
Could use some suggestions on what to try next. |
__________________
The views,expressions and opinions are mine and mine alone from what I have learned. These will be solely directed to the member by member's name and no other person unless I use no name. I make no warranties or guarantees.
|