Quote:
Originally Posted by Phoenix32
You are on the right track with the power button. The 4400/4200/4500/15000 etc are notorious for the power button going bad. What most often happens is the button gets pressed too hard and the little switch seperates from the circuit board it is soldered to. Check this first!
|
I had one of these recently the 4500 unit was very inconstant but as soon as I changed over the switch block it has worked without issue...
The switch came from a faulty 4200 with a dodgy m-board or backplane that I have…
I guess they cousl be a little more robust but it comes down to the user's temperament… Say no to reckless IT Hardware abuse!