Snap M4100 failde after battery replacement
Hi All,
before I would like to excuse if my English isn't fluent: I'll try to explain better than I do.
A friend of mine has a Snap M4100 that start with replace CMOS battery message: the sw company who assist him replace the battery with a new one but, after that, the server become unreacheable on the net ( both Assist and web interface ) and it seems also that the disk raid is not working/loaded. He ask me for an help - I work as IT professional for a private company - but I've never managed this kind of server. Technician of the sw company told him that could be a raid problem, but I don't think that a battery replacement could disrupt a raid config or scratch a flashrom based OS. Unfortunately I've not much technical data from the server ( OS release ecc. ) except that it's - I think, after reading some related documentation - a raid 5 config and that hd set is 3x60Gb and 1x80Gb.....and this appear to me a very strange kind of configuration.
Before going to operate on the server, could anyone of you professional give me some advice or ideas ?
Many thanks to all.
Cheers
Mauro
|