OK...finally I entered on server os and run debug: here results
Logical Device: 10006 Position: 0 JBOD Size (KB): 32296 Free (KB): 19952 Private Mounted
Label:Private Contains system files only
Unique Id: 0x4321BC1D49A57614 Mount: /priv Index: 12 Order: 0
Partition: 10006 Physical: 10007 FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 10007 Drive Slot: 0 IDE Size (KB): 78150656 Fixed
Logical Device: 1000E Position: 0 JBOD Size (KB): 32296 Free (KB): 19952 Private Mounted
Label:Private Contains system files only
Unique Id: 0x137BDEDB4F8217F4 Mount: /pri2 Index: 13 Order: 1
Partition: 1000E Physical: 1000F FS Size (KB): 32768 Starting Blk: 515 Private
Physical: 1000F Drive Slot: 1 IDE Size (KB): 58615296 Fixed
Logical Device: 10008 Position: 1 ORPHAN Size (KB): 58154080 Free (KB): 0 Public Unmounted
Label
rive2 Orphan from BACKUP - RAID5
Unique Id: 0x7484411026802832
Partition: 10008 Physical: 1000F ORPHAN Size (KB): 58154080 Starting Blk: 57524 Public
Physical: 1000F Drive Slot: 1 IDE Size (KB): 58615296 Fixed
Logical Device: 10018 Position: 2 ORPHAN Size (KB): 58154080 Free (KB): 0 Public Unmounted
Label
rive4 Orphan from BACKUP - RAID5
Unique Id: 0x7484411026802832
Partition: 10018 Physical: 1001F ORPHAN Size (KB): 58154080 Starting Blk: 57524 Public
Physical: 1001F Drive Slot: 3 IDE Size (KB): 58615296 Fixed
Logical Device: 60000 Position: 3 RAID_BROKEN Size (KB): 174462240 Free (KB): 0 Public Unmounted
Label:RAID5 Large data protection disk
Unique Id: 0x7484411026802832
Partition: 10000 Physical: 10007 R 60000 Size (KB): 58154080 Starting Blk: 69734 Public
Physical: 10007 Drive Slot: 0 IDE Size (KB): 78150656 Fixed
Partition: 10010 Physical: 10017 R 60000 Size (KB): 58154080 Starting Blk: 57524 Public
Physical: 10017 Drive Slot: 2 IDE Size (KB): 58615296 Fixed
any way to have the two orphaned drive recovered ? I know that on a raid 5 with 4 disk it's impossible, but if someone has good suggestion will be welcome.
I was thinking to connect the server crossed to my laptop/desktop and see if I can recover data with some sw tool ( RStudio, UFS Explorer or Raid data recovery ). Could be a right way ?
Thanks.
Mauro