Pro/Forums - View Single Post

blue68f100 · 12-10-2010, 03:35 PM

What you have is the SnapOS not a bin/image file that can be loaded onto a raw disk. Keep looking for the img file to reload the HD. That is the only way to reload a HD with out the special software used by the factory.

V4 is free from Overland but again you need to get a raw image file to boot your server.

12-10-2010, 03:35 PM	#9
blue68f100 Thermophile Join Date: Jul 2005 Location: Plano, TX Posts: 3,135	Re: snap server failed? What you have is the SnapOS not a bin/image file that can be loaded onto a raw disk. Keep looking for the img file to reload the HD. That is the only way to reload a HD with out the special software used by the factory. V4 is free from Overland but again you need to get a raw image file to boot your server. __________________ 1 Snap 4500 - 1.0T (4 x 250gig WD2500SB RE), Raid5, 1 Snap 4500 - 1.6T (4 x 400gig Seagates), Raid5, 1 Snap 4200 - 4.0T (4 x 2gig Seagates), Raid5, Using SATA converts from Andy Link to SnapOS FAQ's http://forums.procooling.com/vbb/showthread.php?t=13820