"Previous Post"
Max,
If you want to know what adapter that works with the GOS just message me here with your paid email acct. address and I'll tell you what I found on my own and which adapter worked for me.
I've tested many adapters/chip-sets and this is the one that has worked with GOS with no problems for me. You will have to see if it works in your unit's sled. I've used mine in my snapserver for months now, and tested it on GOS 4.1 kernal and higher, with no problems.
As always, with these adapters over time, batches may change and suppliers may change without notice. But I have not had a problem with that yet. I would suggest buying one and seeing if it works. Without going in to details here, that is IF you are willing to make the ribbon modifications and a few other modification that are for your unit's sled. These modifications are not rocket science or child's play and doesn't cost a lot if you are a D.I.Y. person, but if you don't have some time,patience,or mechanical ability, then this is not for you.
Phoenix32's statements about me are false as usually and are delusional. He is a megalomaniac.
First hand facts:
I have personally tested and installed many OS. The adapter I used has worked with DOS,OS2Warp4 and up,Linux6.1 and up,Windows9x-XP,SnapOS all,GOS 4.1 and up, installations. But as a reminder, not every PCB is equal. I'm only referring to the adapter I used. There maybe other adapters with different chip-set that may or may not work. I have not tested ALL of them nor could I or want to, but I've tested many.
Best regards,
bitor
Quote:
Originally Posted by Max8
Hi Pheonix,
what is the IDE to sater coverter that you use?
|