Pro/Forums - View Single Post

Phoenix32 · 07-07-2011, 09:36 PM

An interesting point has been made here. It appears there were two (or more) variations of the actual chassis. All of my units hot swap with no probems, but one other person had the same problem as you mention above. After looking closer at things (from some photos sent to me), it does appear some of the chassis do have tighter clearances than some of the others. The 4400's are all like this. The cure is as you suggested, to trim the plastic piece.

07-07-2011, 09:36 PM	#3
Phoenix32 Thermophile Join Date: May 2006 Location: Yakima, WA Posts: 1,282	Re: SATA Adapter Review in 4200/4500 An interesting point has been made here. It appears there were two (or more) variations of the actual chassis. All of my units hot swap with no probems, but one other person had the same problem as you mention above. After looking closer at things (from some photos sent to me), it does appear some of the chassis do have tighter clearances than some of the others. The 4400's are all like this. The cure is as you suggested, to trim the plastic piece. __________________ ~ 6 x Snap 4400 (SATA Converted) 2 x Snap 4500 (SATA Converted) 1 x Snap 110 5 x Snap 410 3 x Snap 520 2 x Sanbloc S50 Drives from 250GB to 2TB (PATA, SATA, and SAS) GOS v5.2.067 All subject to change, day by day......