I am placing this rad in my Antec 1040 case. I will using two PanaFlo 120mm 86 CFM fans configured in a push/pull setup. I will have to remove the two front fans and cut the front case so the 120mm fan will bolt to the front. The rad has 1/2" barbs.
The pump I will use is the Eheim 1250.
The W/B is questionable either the Maze2 1/2" or Sp@irl 1/2" if I can get my hands on one.
I may also put a 120mm fan in top case. I was planning on a rad in the top of the case as well, but the rad I received I did not like.
|