Pro/Forums - View Single Post

DigitalChaos · 02-18-2002, 01:58 PM

you want the 1/8" wall and you want the durometer to be Shore A 50 durometer
along with your id of either 3/8 or 1/2 depending on your system.

make sure you look at the OD of the tubing when you are buying clips

this is the stuff dangerden is selling.. i believe it to be what caseetc sells too..

just a note: dangerden is CHEAPER than mcmaster unless you are getting a roll

02-18-2002, 01:58 PM	#2
DigitalChaos Cooling Savant Join Date: Jan 2002 Location: Waukesha, Wi Posts: 698	you want the 1/8" wall and you want the durometer to be Shore A 50 durometer along with your id of either 3/8 or 1/2 depending on your system. make sure you look at the OD of the tubing when you are buying clips this is the stuff dangerden is selling.. i believe it to be what caseetc sells too.. just a note: dangerden is CHEAPER than mcmaster unless you are getting a roll Last edited by DigitalChaos; 02-25-2002 at 01:25 AM.