measure the voltage on your molex connector, lets say it's 4.9v, then mbm says 4.84v, this means your psu is dropping .1v, while your mobo is dropping .06v. So your psu sucks more than your mobo (highly likely bearing in mind you have an enermax) In otherwords, a 5v rail mod won't change much.
If your psu is giving out 5.16v, and your mobo is giving you 4.84v, then your mobo is a piece of shit
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|