Quote:
Originally posted by EMC2
Ah, I remember those pics now  Nice set up btw  Only thing missing is quick disconnects, lol.
The only suggestion I might have would be instead of having the T for the air trap where it is, putting it at the output port of the rad (put a T in the short straight copper tubing coming from the output of the rad).
|
Thanks EMC2.
You are
absolutely correct about my error in the placement of the "T". I totally blew it. At first I was going to place it at the exit pipe of the block as you suggest then somehow I lost it and placed it down where you see it. Due to this placement it took longer for the air to cycle out, as you already know.
When I go to drain the system, I will relocate my "T", thanks for the suggestion. Today I put the fans on spacers, 1" away from the heater core. I wanted to see if this will make a difference, as I read this space allows better flow. We shall see how it turns out.
Got the 85 cfm Panaflo's running at 7V right now and as I type MBM says I am at 36 C. I ran Sandra through 10 loops at 72F ambient heated to 38C, that's not too bad for my first build and my first water cool.
Thanks for the positive comments and thanks to all here for the help I appreciate it.
I realize the goal is to put the whole package inside the case, well at least it's all
attached to my case! LOL!
Jim