the super cube is nice but needs high cfm on each side unless you do a slight mod to it:
take the top and bottom plates off and pull air through that way, and close the original fan holes off
i had a super cube and it cooled fine with just a low cfm 92mm on one side. (almost as good as a bix with an equal fan)
the BIX is nice and i am using one now. using only 1 Panoflow H1a powered at around 5v. my idle temp is about 37C and my max is about 42C and the ambient is about 23-34C
the setup for those temps are as follows: BIX > eheim 1250 > duron 850@1000 1.85v > geforce2 stock speed > kt7a-raid chipset > maxtor 7200 rpm 60 gig > res > then back up to the rad
|