Another block design
the inlet is 1/2", the channels are 3/8" x1/2", the block is 3/4" of an inch high, with a 1/4" thick base, the outlets are 3/8". The holes are the position of the amd mounting holes, a P4 version wouldn't be hard to do.
comments?
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|