it isn't 4 3/4", it's 3 5/8" Regardless though, a 92mm x 50mm will fit on both sockets of my VP6, and both sockets of the Iwill, Asus, and Epox dual athlons.
Looking at the 8kta3+, it wouldn't hit the NB, but it would be off the side of the board by about 5mm
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|