Pro/Forums - View Single Post

Fixittt · 03-02-2002, 07:02 PM

on some of those, you also have to consider that the whole diameter for the mouting bolts is not that small, I see at least 1 that will not work in that configuaration.

U might try either making the outlet channels shorter, or angled and shorter. Having that mounting hole thrue the channel wall is not a good idea, when you go to drill it, it will either warp badly, break the wall, or cause the wall to be super thin, and sprining a leak over time.

my chump change worth

03-02-2002, 07:02 PM	#15
Fixittt CNC Beyatch Join Date: Aug 2001 Location: Tulsa Spell it backwards Posts: 721	on some of those, you also have to consider that the whole diameter for the mouting bolts is not that small, I see at least 1 that will not work in that configuaration. U might try either making the outlet channels shorter, or angled and shorter. Having that mounting hole thrue the channel wall is not a good idea, when you go to drill it, it will either warp badly, break the wall, or cause the wall to be super thin, and sprining a leak over time. my chump change worth __________________ Creator of the Spir@l Block Longest post ever http://forums.procooling.com/vbb/showthread.php?s=&postid=43808#post43808