Pro/Forums - View Single Post

EMC2 · 03-04-2002, 08:20 PM

Look closely at that pic that Rick posted. Notice how the water isn't even flowing around the sides of the block except directly under the inlet and outlet.

Also with the "crosshatch" on top of the slug such as it is, I suspect the flow through the valleys of the hatching is very low. Good flow probably only extends at most a third of the way into the valleys. The only good side is the flow on top of the block would be quite turbulent.

icel0rd -
What processor, what multiplier, what FSB, what memory settings, running what program do you get your 9C over ambient. And what specifically is at that temp of and how is the measurement taken?

03-04-2002, 08:20 PM	#27
EMC2 Cooling Savant Join Date: Feb 2002 Location: Dark Side of the Moon Posts: 365	Thinks Brad needs to find a good lady =P Look closely at that pic that Rick posted. Notice how the water isn't even flowing around the sides of the block except directly under the inlet and outlet. Also with the "crosshatch" on top of the slug such as it is, I suspect the flow through the valleys of the hatching is very low. Good flow probably only extends at most a third of the way into the valleys. The only good side is the flow on top of the block would be quite turbulent. icel0rd - What processor, what multiplier, what FSB, what memory settings, running what program do you get your 9C over ambient. And what specifically is at that temp of and how is the measurement taken?