Pro/Forums - View Single Post

GuyBFF · 07-19-2001, 12:46 PM

With a decent pump it won't matter where the waterblock is, the bubbles move very fast with my 1/2" and Mag-Drive 350 (almost to fast to see!).
The T-fittings also doesn't need to be the highest item in the system, it just helps to be after the pump output, on the highest section of that hose (the pump tends to collect the bubbles) so that the bubbles that are stuck in the pump can rise out easiest if you shut off the computer.

07-19-2001, 12:46 PM	#3
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	With a decent pump it won't matter where the waterblock is, the bubbles move very fast with my 1/2" and Mag-Drive 350 (almost to fast to see!). The T-fittings also doesn't need to be the highest item in the system, it just helps to be after the pump output, on the highest section of that hose (the pump tends to collect the bubbles) so that the bubbles that are stuck in the pump can rise out easiest if you shut off the computer. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...