Pro/Forums - View Single Post

WebMasta33 · 03-17-2002, 11:59 AM

--A T is at the top of the system, flow goes along the bottom of the T, and the top of the T connects to a capped tube. This causes air to go to the top of this tube, so even if you have air in the system after you bleed it; the air has a place to go. This also makes it easy to fill the system. Just use a funnel, pour it in, seal it off, and you're set.

03-17-2002, 11:59 AM	#4
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	--A T is at the top of the system, flow goes along the bottom of the T, and the top of the T connects to a capped tube. This causes air to go to the top of this tube, so even if you have air in the system after you bleed it; the air has a place to go. This also makes it easy to fill the system. Just use a funnel, pour it in, seal it off, and you're set. __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========