View Single Post
Unread 03-19-2002, 10:04 PM   #3
icel0rd
Cooling Savant
 
icel0rd's Avatar
 
Join Date: Jan 2002
Location: Where even the devil wont go
Posts: 103
Default

Thanks for the reply. Basically, what you are saying is that it's either antifreeze or water wetter or a corroded metal mess later on?

I was told that water wetter will kill this pump because of buildup/deposits.

Well, a couple of questions come to mind then..

I guess that leaves me stuck with antifreeze then since it does protect metal from corrosion. This makes me wonder though.... Does antifreeze work the same was as the watter wetter by leaving some sort of protective film on the metal?

The other question is, does adding alcohol to the water make the water anti corrosive? If so, that would be great because all I would need to do is drop my color in it and live happily ever after.

Last question is, does mixing dyelite with an antifreeze-water mixture present any issues? If not, then I'll go that route if alcohol-water doesn't help with corrosion.


Thanks again

-Ice-
__________________
Redhat 8
Gigabyte GA-7dpxdw+ w/dual modded AXP 1800+ CPUs running at AXP 2000+ speed
1 512 meg crucial ECC DDR 2100
1 512 meg Infineon PC2700
Sblive Value
Geforce 4 Ti4600
Deskstar 60 gig drive

(1)K4.1 waterblock (.5" barbs)
(1) Maze 3 waterblock (.5" barbs)
Black Ice Rad
TopFin 250gph pump
1/2" OD Vinyl hose (yep, vinyl)
icel0rd is offline   Reply With Quote