Part Two
I replaced the original 2-wire cable (with a big Molex) of the fanspeedselector on the front panel by a 3-wire cable with a little Molex. Through a drilled hole in the PCB I connected the third wire with the RPM monitoring connection of one of the two front fans.
Rear view of the fanspeedselector. The wires are glued with a gluegun.
"Purple Ice" anti-corrosion additive and green Fluo Dye Lite.
These are the parts that I used for modding the Swiftech MCW462. 1/4" to 1/4 nipple (drilled to 10mm internally), a 90° 15mm copper turn and a piece of 15mm copper tube, all hardsoldered together.
Compared to the original swivel connectors of the MCW462.
Comparision of the ID of a standard 3/8" brass hosenipple and a 20mm PVC tube.
One of my 30cm (12") CCFT Black Lights and a pink one + convertors.
CD
