The rig is in pieces now but I'll have decent case cooling and the air from the radiator will be ducted streight out the case so it isn't blowing over any components. Clamping is a problem since I have a .5" aluminum coldplate with flat head screws for mounting. I just went to the hardware store and picked up some hex head screws and an extra long hex key. I'm shure that will drop temperatures drasticly. I'll be moving to a .375-.5 copper coldplate as soon as I can order a bar of it. The coldplate itself should drop the temps as much as 5c. I'm aiming for 10-15c under load and I think its possible with my current setup.
|