Pro/Forums - View Single Post

Joe · 06-01-2001, 03:44 PM

Yard, those danners can run at very high temps so I wouldnt worry about a hot pump. I would run it like this Pump - Radiator - Block

That way all the coolant from the CPU and the pump are cooled before it re-enters the CPU block

The Rule I have used is - let everything else in the system run hot as hell, but keep my block cool. And no running water at 85DegF through a pump will NOT hurt it.

06-01-2001, 03:44 PM	#14
Joe The Pro/Life Support System Join Date: Dec 1999 Location: Denver, CO Posts: 4,041	Yard, those danners can run at very high temps so I wouldnt worry about a hot pump. I would run it like this Pump - Radiator - Block That way all the coolant from the CPU and the pump are cooled before it re-enters the CPU block The Rule I have used is - let everything else in the system run hot as hell, but keep my block cool. And no running water at 85DegF through a pump will NOT hurt it. __________________ Joe - I only take this hat off for one thing... ProCooling archive curator and dusty skeleton.