Pro/Forums - View Single Post

LiquidCool · 07-25-2001, 08:15 PM

You know, a slot, the way the DD blocks are made is with an end mill. You plunge down a 1/16" then slowly move the table down the slot till you get to the other end. Then plunge another 1/16" and go back over it. Repeat until the slot is the depth you want...

07-25-2001, 08:15 PM	#12
LiquidCool Cooling Savant Join Date: Apr 2001 Location: Central Florida Posts: 231	You know, a slot, the way the DD blocks are made is with an end mill. You plunge down a 1/16" then slowly move the table down the slot till you get to the other end. Then plunge another 1/16" and go back over it. Repeat until the slot is the depth you want...