View Single Post
Unread 07-20-2001, 03:36 AM   #1
GuyBFF
Cooling Savant
 
Join Date: Jun 2001
Location: Winnipeg, MB, CA
Posts: 242
Default Hoses - What Do You Use and What Do You Recommend?

As you might have read in another of my topics I just lost my AXIA 1.33ghz 266 T-Bird due to braided PVC hose rocking the waterblock up off the chip (after I changed my video card). I've taken the very largest diameter paths I could (no sharp bends at all). But really the hose is to stiff.

What does everybody recommend for a kink and collapse (from the pump suction) resistant hose which is very flexible (so this time the waterblock isn't being rocked at all)???

I've already been told about McMaster Tygon in 1/8" Wall, 1/2" ID. 3/4" OD and McMaster Silicon in same size. Has anyone had any luck with these, or what do you recommend in 1/2" (doesn't need to be clear, anything flexible and kink / collapse resistant)???

I really don't care to spend a couple dollars a foot as cheap hose cost me 200USD (about) for a new CPU .
__________________
A7V8X
Danger Den Maze II
Danner Mag Drive 350
Heater Core Style Rad
Thunderbird 1400 (Soon Barton)
512mb PC2700 CL2
Promise SX4000 Raid 5 w/256mb PC133 Cache
4x40gb Western Digital 7200hdd
Plus More...
GuyBFF is offline   Reply With Quote