Pro/Forums - View Single Post - Hoses - What Do You Use and What Do You Recommend?

GuyBFF · 07-21-2001, 03:05 AM

From what Amy says, it the 1/2" ID, 3/4"OD 1/8"wall Silicon tubing listed under rubber tubing. It's actually cheaper at Danger Den than McMaster (assumin Danger Den buys it in the full 50ft coils). I won't be going 50 below, but very pliable sounds very good to me, and $2.50x7 is much cheaper than $250x1 for a CPU

.

Thanks everybody

07-21-2001, 03:05 AM	#9
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	From what Amy says, it the 1/2" ID, 3/4"OD 1/8"wall Silicon tubing listed under rubber tubing. It's actually cheaper at Danger Den than McMaster (assumin Danger Den buys it in the full 50ft coils). I won't be going 50 below, but very pliable sounds very good to me, and $2.50x7 is much cheaper than $250x1 for a CPU . Thanks everybody __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...