Thanks guys and
Ph I don't want to take over your topic here, but sorry I'm an image junkie
I'd really love to have the ability to make these items for sale but they were made with pretty basic equipment and not something I could quickly or easily repeat.
Build details here for those who are also image junkies like me
:-
<A HREF="http://discussions.hardwarecentral.com/Forum11/HTML/015803.html" TARGET=_blank>Asus v8200 GF3 Ram w/b build, ( just call me Rotor ;-)
</A>
Asus v8200 GF3 water-cooling part 2 (GPU)
I'm using geo-thermal cooling which is silent, (should give 8°C to 10°C coolant when finished in my location UK) requires no fans and is totally silent at the PC, (although not noisy the pump would be the only item producing noise in this system, but will be mounted far away from the PC)
Check this topic for full details.
http://forums.procooling.com/ubbcgi/...c&f=2&t=000433
The trouble with removing the forced airflow in a PC is items that may not normally get hot could. I'll be watercooling the PSU next so If you don't here from me expect the worst
