Pro/Forums - View Single Post - Need help w/ watercooling an Inwin Q500 tower

Wiss · 04-07-2002, 10:29 AM

I plan on water cooling my In-Win 500 soon as well and it looks like I'll be going with a layout similar to ECU Pirate's with either a homemade or modified 3.5" enclosure above the PSU with a 120 pulling air through them. With all that space in the front cleared up it should be pretty easy to fit in a decent sized radiator. For a resevoir I'm going to be using a 2.5" acrylic cylinder capped off on top that goes through the top of the case to allow for easy filling. Not sure where to mount the pump as I haven't decided what I want to go with yet but I figure there should be enough room in front to mount it on the bottom of the case.

04-07-2002, 10:29 AM	#20
Wiss Cooling Neophyte Join Date: Apr 2002 Location: Detroit, MI USA Posts: 8	Yet another IW 500 owner I plan on water cooling my In-Win 500 soon as well and it looks like I'll be going with a layout similar to ECU Pirate's with either a homemade or modified 3.5" enclosure above the PSU with a 120 pulling air through them. With all that space in the front cleared up it should be pretty easy to fit in a decent sized radiator. For a resevoir I'm going to be using a 2.5" acrylic cylinder capped off on top that goes through the top of the case to allow for easy filling. Not sure where to mount the pump as I haven't decided what I want to go with yet but I figure there should be enough room in front to mount it on the bottom of the case.