Pro/Forums - View Single Post

Shelly · 04-14-2002, 08:18 PM

I would like to post some pics, but am not sure how.

I am using a Danner Mag 5 pump (did the impeller cover sealing) with a Black Ice Extreme rad, Maze 1 (P3-933) block from Danger Den, and an air trap.

Does anyone have a good solution to quiet down the "humming" of the pump? I have heard about the impeller trick, but mine isn't making any noise like that. I cut a square out of an old mouse pad and placed it under my pump (which is mounted to the bottom of my Lian Li PC-70 case). I also used rubber washers on the screws that went underneath the case into the pump.

I have heard that the Eheim 1250 is quieter than the Danner, but not sure. If I could only quiet the hum, I would be set.

04-14-2002, 08:18 PM	#1
Shelly Cooling Neophyte Join Date: Nov 2001 Posts: 36	Finally finished my first WC project I would like to post some pics, but am not sure how. I am using a Danner Mag 5 pump (did the impeller cover sealing) with a Black Ice Extreme rad, Maze 1 (P3-933) block from Danger Den, and an air trap. Does anyone have a good solution to quiet down the "humming" of the pump? I have heard about the impeller trick, but mine isn't making any noise like that. I cut a square out of an old mouse pad and placed it under my pump (which is mounted to the bottom of my Lian Li PC-70 case). I also used rubber washers on the screws that went underneath the case into the pump. I have heard that the Eheim 1250 is quieter than the Danner, but not sure. If I could only quiet the hum, I would be set.