Here's my solution;
Sticky sided Velcro
Works great and keeps you pump attached to the case when you move it around.
I put the "soft" side on the case and the "rough" side on the pump itself. Push the pump onto the tape, wiggle it around a bit so it grabs, and that's it. I can't even hear my Rio over my 120mm fan unless I shut down the system.
Good luck
__________________
Athlon64 X2 4200+ @ 2.5Ghz (250FSB x 10)
OCZ VX 1GB 4000 @ 250FSB (6-2-2-2 timmings)
DFI LANParty nForce4 Ultra-D
SCSI Raid 5 x (3) Cheetah 15K HDDs
LSI Express 500 (128MB cache)
OCZ PowerStream 520W PSU
ATI X850XT PE (Stock)
DTEK WhiteWater + DTEK Custom Radiator
Eheim 1250
|