Athlon 'c' 1333 at 1477 (multiplier OC only... haven't tweaked yet.)
vcore hasn't been adjusted, but it reads 1.82 for some reason.
Giga-byte GA-7DXR mobo.
The big fan is attached to the big rad in a cardboard enclosure that works quite nicely. (it pulls, and it exhausts out the front.) The only other case fan running now is the PSU fans, and they exhaust too. (no intakes.) All fans are running at the lowest speed, and my temps are currently 37C. The biggest open area for intake is the hole where the PSU used to be. (now the two IBM HD's are sitting there. The PSU was moved up 6", and is now helping to cool my HD's. i.e., most of the air entering my case to cool the rad is passing over those two HDs. The other open spot is the two PCI slot covers that I removed right under my GF3 card, so that helps to cool that.
I don't know how reliable my temp gauges are... I'm using speedfan 4.02 utility, and whatever sensors are built into my computer.
It reports: CPU 37c, temp2 31, temp3 23, and temp4, 4C !!!
4c??? WTF. It's about 23c room temp...
What utility should I use?
__________________
Does a radioactive cat have 18 half lifes? --Kenny
my pimpin' rig: ...previously poorly cooled...
486DX-2 66mhz @ 75mhz, 4Mb ram, shared, 256Mb hard drive
Onboard VGA, watercooled, of course
16-color monitor, labtec speakers, 28kbs USRobotics modem
Windows XP (think about it)
Maze 3, DDen GF3 block, Eheim 1250, econoline van HC, 1/2" hose w/ 5/8" fittings Comair 172mm fan
|