Pro/Forums - View Single Post - Received my Maze3 yesterday, not quite satisfied.

EMC2 · 04-16-2002, 09:22 AM

FYI - that's ~74Watts for your CPU/FSB/VCore levels ECU.

ECU - MotherBoard monitor is a great utility to use - or CPUCool. As far as the 4th temp reading - an unused input - ignore it

Jim - yes, the inside channels is indeed what I was talking about. Approximately how deep are those channels Jim?

Zoson - higher velocity flow is better for increasing turbulence near the walls and for increasing the heat transfer coefficient. That said, even with a center rib that is 3x as thick as the current one, you would still have a fair increase in size from the inlet to the center area of the block.

04-16-2002, 09:22 AM	#82
EMC2 Cooling Savant Join Date: Feb 2002 Location: Dark Side of the Moon Posts: 365	FYI - that's ~74Watts for your CPU/FSB/VCore levels ECU. ECU - MotherBoard monitor is a great utility to use - or CPUCool. As far as the 4th temp reading - an unused input - ignore it Jim - yes, the inside channels is indeed what I was talking about. Approximately how deep are those channels Jim? Zoson - higher velocity flow is better for increasing turbulence near the walls and for increasing the heat transfer coefficient. That said, even with a center rib that is 3x as thick as the current one, you would still have a fair increase in size from the inlet to the center area of the block.