Pro/Forums - View Single Post

GuyBFF · 08-10-2001, 04:19 PM

No, obiously not, I'm giving an example, but from owning the following:

duron 650 @ 800
duron 750 @ 1000
tbird 1.333 @ 1550
tbird 1.4 @ 1700

And having tried an AC Heater Core in the DD Cube Configuration and BE Aquacoil Configuration, and now a Big Momma style heater core, I've seen that differences in the CPU don't affect the water temperature in the ways that they do in an air cooled system. The example should be close for his configuration.

It seems as though the pump and CPU both have a fraction in heating the system, and differences in the CPU's are more subtle than in an air cooled situation. V'modded my CPU's used to cook once the voltage was raised with a WBK38, now it's again only a couple of degrees. Seems like the hotter you go the better the system cools (sorta makes sense).

Right now I'm at 1702mhz 148FSB, 2.0v, 37c with a thermister on the side of the slug, and 25c ambiant. I have one 107cfm fan with a paper shroud on a Big Momma style heater core, 1/2" hose, 2 ounces of water wetter, a danner 350gph mag-drive (I think a 250 would be better) and a Danger Den Maze 2 1/2" "upgrade"

08-10-2001, 04:19 PM	#6
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	No, obiously not, I'm giving an example, but from owning the following: duron 650 @ 800 duron 750 @ 1000 tbird 1.333 @ 1550 tbird 1.4 @ 1700 And having tried an AC Heater Core in the DD Cube Configuration and BE Aquacoil Configuration, and now a Big Momma style heater core, I've seen that differences in the CPU don't affect the water temperature in the ways that they do in an air cooled system. The example should be close for his configuration. It seems as though the pump and CPU both have a fraction in heating the system, and differences in the CPU's are more subtle than in an air cooled situation. V'modded my CPU's used to cook once the voltage was raised with a WBK38, now it's again only a couple of degrees. Seems like the hotter you go the better the system cools (sorta makes sense). Right now I'm at 1702mhz 148FSB, 2.0v, 37c with a thermister on the side of the slug, and 25c ambiant. I have one 107cfm fan with a paper shroud on a Big Momma style heater core, 1/2" hose, 2 ounces of water wetter, a danner 350gph mag-drive (I think a 250 would be better) and a Danger Den Maze 2 1/2" "upgrade" __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...