Iwill XP333-r
Athlon 1.333 9.5x174fsb 1653mhz
Vcore 2.04
Vmem 3.1
256 Samsung 2700
Danner Pump 350
6x6 heatercore with 2 120mm fans push pull(ea 74cfm more or less)
Ambient 28.5
Water Idle (inline sensor) 31c
Cpu Idle 36.5c
2 hours of Prime 95
water load 33c
Cpu Load 41c
the idle temps were measured 10 minutes after the load test
These temps are from a DigiDoc 5 for all temperatures. Temps from Cpu onboard sensor was 1c higher at idle, 2c higher at load.
Also had a sensor from the DigiDoc ran to the back of Mainboard at the cpu socket 38c at load
Know remember my Ambient is 28.5c.
Also I still have a number of small air bubbles running thru the system.
Noticed that the air Bubbles coming out of the block were twirling in a nice tight spiral in the center of the hose barb( could this mean the turbulence is working) coming in the air bubbles were disbursed thru out the tubing(no pattern)
I like it, The Maze 3 is worth it.
But latter this week it will be a Maze 3-1 again pelted insulated and chilled
fresno12
|