Pro/Forums - View Single Post

Stepback · 04-21-2002, 08:24 AM

Kevin: Checkout this post http://forums.procooling.com/vbb/sho...&threadid=2330 . I've been running this pump for a couple months. I have a 10 amp PWM on the pump to control the speed and noise. Which is not much louder than a 120mm case fan. You may be able to get the other pump from jabsco now.

BTW: When are you going to get time to finsh the BlackIce write up. I also have a YY-cube that I have finshed the inside but I still have to get the green cold cathiod tube's and glue up the outside. It's name is "Borg Tactical Cube 641". Here's a link to the picture I'm using to do the artwork. http://www.ccdump.org/images/tactcube.jpg I will post pics when I finsh it.

04-21-2002, 08:24 AM	#14
Stepback Cooling Neophyte Join Date: Feb 2002 Location: Houston Texas Posts: 52	Kevin: Checkout this post http://forums.procooling.com/vbb/sho...&threadid=2330 . I've been running this pump for a couple months. I have a 10 amp PWM on the pump to control the speed and noise. Which is not much louder than a 120mm case fan. You may be able to get the other pump from jabsco now. BTW: When are you going to get time to finsh the BlackIce write up. I also have a YY-cube that I have finshed the inside but I still have to get the green cold cathiod tube's and glue up the outside. It's name is "Borg Tactical Cube 641". Here's a link to the picture I'm using to do the artwork. http://www.ccdump.org/images/tactcube.jpg I will post pics when I finsh it. __________________ Stepback Maintaining today for a better tommorrow.