Pro/Forums - View Single Post - So how tough would it to be to solder a copper top on this Maze3?

WebMasta33 · 04-21-2002, 09:21 AM

I don't understand why every says you need plumpers goop for sealing this up...

All you do, is drill out a copper plate to match the existing screw holes for the lexan top. The lexan is sealed by the lovly o-ring, so once you screw down the copper, it will be sealed as well.

Heck, you can:

--use the lexan top for a template of the screws and barb holes
--use the same screws and barbs from the lexan top.

So all you really need is the copper top.

That's just my take on it.

04-21-2002, 09:21 AM	#17
WebMasta33 Cooling Savant Join Date: Dec 2001 Location: Nebraska Posts: 526	I don't understand why every says you need plumpers goop for sealing this up... All you do, is drill out a copper plate to match the existing screw holes for the lexan top. The lexan is sealed by the lovly o-ring, so once you screw down the copper, it will be sealed as well. Heck, you can: --use the lexan top for a template of the screws and barb holes --use the same screws and barbs from the lexan top. So all you really need is the copper top. That's just my take on it. __________________ ========== --Soyo KT333 DRAGON Ultra (Platinum Edition) --AMD 1.4 @ 1.54 (11x) --768mb of PC2100 (@140FSB) --Asus v8200 GeForce3 @ 210/490 --Maxtor 40gb Quiet + 2 IBM 40gb 60GXPs (removable) + 8gb WD --Audigy --Maze 3, DD Gf3 block, 2x BIX, Eheim1250 ===========