the 5v line on almost all enermax drop low after time, or just are too low to begin with. you can mod it so the line is higher, but then you get a 13v on your 12v
pcp&c = PC power and cooling
http://pcpowerandcooling.com/
directron sells them i think
i have a 475w pcp&c... the voltages are rock stable.
my stupid DD5 alarm goes off every so often sayin that it hit 5.25 (too high) but a multimeter on it shows 5.12-5.15 and NOTHING out of that range. MBM shows 4.98-5.04 ugh... im not sure which of the 3 is right, but i trust the multimeter. and the fact that they are the most rock stable PSU compared to all the other ones i have!
you can pretty much load up a certain line on the PCP&C, and you will see barely any change in the rest of the lines
invest a little bit of $ and get a pcp&c (its the same thing as going for a rio vs an eheim pump)
sparkle and antec are basically like Danner pumps =)
can you tell i love pcp&c?