Pro/Forums - View Single Post

UpAllNight · 04-24-2002, 09:09 AM

do u guys fill your system and bleed it before u install it in your case? or do u mount your water block and then install in your case and then attach your hoses...all i have done so far is put it all together outside of my case and filled it and bleed it and ran it for 24 hours to check for leaks

my setup is

chevette rad
1" shroud and 1 120mm panaflo fan
maze 3
eheim 1250 pump
in a 1040 antec case

any advice would be very help full

04-24-2002, 09:09 AM	#1
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	my first w/c setup up and i have a few ? do u guys fill your system and bleed it before u install it in your case? or do u mount your water block and then install in your case and then attach your hoses...all i have done so far is put it all together outside of my case and filled it and bleed it and ran it for 24 hours to check for leaks my setup is chevette rad 1" shroud and 1 120mm panaflo fan maze 3 eheim 1250 pump in a 1040 antec case any advice would be very help full __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live