Pro/Forums - View Single Post

ECUPirate · 04-29-2002, 11:40 PM

lemme check on the noise.. yep... noisy.. I've got it on a 25ohm rheostat... not sure what the bottom voltage is, 8-9v maybe. Even at that low speed, it's very audible. ...a low pitched hum...livable. I can hear the motor itself as well as the fan blades spinning. At 12v, I can hear the air rushing, the motor working, and the blades spinning... no good I tell you. It does, however, provide very adequate airflow. My rotron has 7 feathered blades. Seehttp://www.mpja.com/allpict.asp?dept=48 for a pic.

04-29-2002, 11:40 PM	#5
ECUPirate Hottest Stank of them All Join Date: Mar 2002 Location: Washington, DC area Posts: 533	lemme check on the noise.. yep... noisy.. I've got it on a 25ohm rheostat... not sure what the bottom voltage is, 8-9v maybe. Even at that low speed, it's very audible. ...a low pitched hum...livable. I can hear the motor itself as well as the fan blades spinning. At 12v, I can hear the air rushing, the motor working, and the blades spinning... no good I tell you. It does, however, provide very adequate airflow. My rotron has 7 feathered blades. Seehttp://www.mpja.com/allpict.asp?dept=48 for a pic. __________________ Does a radioactive cat have 18 half lifes? --Kenny my pimpin' rig: ...previously poorly cooled... 486DX-2 66mhz @ 75mhz, 4Mb ram, shared, 256Mb hard drive Onboard VGA, watercooled, of course 16-color monitor, labtec speakers, 28kbs USRobotics modem Windows XP (think about it) Maze 3, DDen GF3 block, Eheim 1250, econoline van HC, 1/2" hose w/ 5/8" fittings Comair 172mm fan