Pro/Forums - View Single Post - Are there any 1/2 inch fitting GPU waterblocks?

GuyBFF · 08-13-2001, 02:58 AM

I mentioned the drop down box as I wsa confused on the site. I figured that the motheroard and GPU blocks used 3/8" NPT just like my waterblock as they said 3/8" fittings. I figured if they included a drop down box for barb size, then the 3/8" fittings must mean the thread size in NPT. It was a poor assumption.

Sorry if I came off blunt. Like I said, I know what the Maze 2 "upgrade" in 1/2" is. It's the only thing I've actually handled. As for the chipset and the motherboard I said in a couple posts that I wasn't sure, I just saw the 3/8" fittings and I know that's what my waterblock is.

08-13-2001, 02:58 AM	#21
GuyBFF Cooling Savant Join Date: Jun 2001 Location: Winnipeg, MB, CA Posts: 242	I mentioned the drop down box as I wsa confused on the site. I figured that the motheroard and GPU blocks used 3/8" NPT just like my waterblock as they said 3/8" fittings. I figured if they included a drop down box for barb size, then the 3/8" fittings must mean the thread size in NPT. It was a poor assumption. Sorry if I came off blunt. Like I said, I know what the Maze 2 "upgrade" in 1/2" is. It's the only thing I've actually handled. As for the chipset and the motherboard I said in a couple posts that I wasn't sure, I just saw the 3/8" fittings and I know that's what my waterblock is. __________________ A7V8X Danger Den Maze II Danner Mag Drive 350 Heater Core Style Rad Thunderbird 1400 (Soon Barton) 512mb PC2700 CL2 Promise SX4000 Raid 5 w/256mb PC133 Cache 4x40gb Western Digital 7200hdd Plus More...