Pro/Forums - View Single Post

UpAllNight · 05-07-2002, 11:01 AM

mastercam has a code generator that has to be set so the nc code comes out to match your mill...unless your lucky and mastercam as a preconfigured code generator that matches your machine...if it doesnt just pic something close to what u need and modify it to match what the manual that cam with your machine...its probly just the code at the beginning and ending of your program

05-07-2002, 11:01 AM	#2
UpAllNight Cooling Savant Join Date: Apr 2002 Location: HILLBILLY LAND Posts: 159	mastercam has a code generator that has to be set so the nc code comes out to match your mill...unless your lucky and mastercam as a preconfigured code generator that matches your machine...if it doesnt just pic something close to what u need and modify it to match what the manual that cam with your machine...its probly just the code at the beginning and ending of your program __________________ XP1800 @172x10.5 Maze 3..Ehiem 1250..Chevette Rad 1 120mm panaflo @7v 1" shroud All fits nicely inside my case ambient(74 F) 2.0v Core(33.5) Loaded idle(31.5c) Enermax 431 watt Antec 1030B Gainward Geforce 3 TI200 241/548 Sony CDRW Creative 52x CD Soundblaster Live