This block might be hefty, but it has a definite advantage: great flow!!!
You should be able to pump a lot of coolant very, very fast, the only problem is...
Your rad works better with a low flow rate (giving more time for the coolant to cool!). So you'll have to either use a lower flow rate, or a very large rad.
Also, this design, like the Swiftech, might have this quirkiness where you have to hold it upside down while filling it up, otherwise you might have air trapped in your WB. It's just something to keep in mind.
In any case, you won't have to worry about a leak because of the coolant pressure!
Nice work...
|