Pro/Forums - View Single Post

WaterPog · 08-13-2001, 07:35 PM

Well....yes and no, their would be reasons to increase or decrease the size of the passages in some areas. for instance, inside the radiator you may want larger a larger path (or many small ones which add up to a larger one) to slow the flow down and give it more time to give up heat. In a chipset or GPU block you may want to go down in size to give more flow back to the processor because it generates more heat and needs more cooling...etc.

It is about designing a SYSTEM not just slapping together a bunch of parts...

08-13-2001, 07:35 PM	#4
WaterPog Cooling Neophyte Join Date: Jul 2001 Location: Portland, OR Posts: 50	Well....yes and no, their would be reasons to increase or decrease the size of the passages in some areas. for instance, inside the radiator you may want larger a larger path (or many small ones which add up to a larger one) to slow the flow down and give it more time to give up heat. In a chipset or GPU block you may want to go down in size to give more flow back to the processor because it generates more heat and needs more cooling...etc. It is about designing a SYSTEM not just slapping together a bunch of parts... __________________ 1.4G AHYJA-Y @ 1.6G with H2O system. Ehime 1060, LiquidCool leviathan, Spir@l Block, all 1/2" It will post at 1725, that is where I want it to be stable....