Pro/Forums - View Single Post - PC-60 Pump/Rad Placement

cybrsamurai · 05-20-2002, 02:33 AM

Hey I just recently put in the same stuff in a LianLi PC65 I think its the same but with a window. I put the Radiator and 120mm fan at the top; with the radiator mounted underneath the fan. I put the pump ontop of the 5.25" drive cage at the bottom between the 3.5" cage and the side of the case Its a modified Ehiem 1250 I pulled the filter cage off and the back piece. It fits but its really tight so you will have to get a right angle adaptor for the top and modify it a bit to get it to fit right. or you could cut the bottom of the external 5.25" cage so the tubes can fit through and mount a Digital Doc in the bottom 5.25 slot so you wouldnt lose the functionality of the space. I'll try to borrow a digital cam so i can show you guys how it works. It keeps the cooling junk out of the way from the rest of the system.

05-20-2002, 02:33 AM	#16
cybrsamurai Cooling Savant Join Date: Jan 2002 Location: Ashland Posts: 296	Hey I just recently put in the same stuff in a LianLi PC65 I think its the same but with a window. I put the Radiator and 120mm fan at the top; with the radiator mounted underneath the fan. I put the pump ontop of the 5.25" drive cage at the bottom between the 3.5" cage and the side of the case Its a modified Ehiem 1250 I pulled the filter cage off and the back piece. It fits but its really tight so you will have to get a right angle adaptor for the top and modify it a bit to get it to fit right. or you could cut the bottom of the external 5.25" cage so the tubes can fit through and mount a Digital Doc in the bottom 5.25 slot so you wouldnt lose the functionality of the space. I'll try to borrow a digital cam so i can show you guys how it works. It keeps the cooling junk out of the way from the rest of the system. __________________ Air cooled my ass.