bear in mind that 226w pelts are 50mm x 50mm. So you have 50mm x 100mm there already. Now lets say you need 5mm all around for the screws to hold the coldplate down.
you are up to 60mm x 110mm already. do you have that much room?
if you do, I'd suggest 2x maze1c-1's on a custom coldplate (get dden to make the coldplate)
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|