pelts are more efficient at lower voltages, but of course the more voltage you put through the more cooling you will get. At 12v at 172w will give you around 43w of cooling, but this isn't aa really accurate figure, anywhere up to 50w could be accurate.
you'd be better to get a 156w 15v pelt and run it at 12v
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|