lets say a 172w pelt is running at full voltage, it uses 278w, and can remove 172w. Lets say it's running at 12v, it uses 69.5w, and can remove 50w of heat. which is more efficient?
75% isn't the best ratio, it's just a good combination between cooling and power use
__________________
2x P3 1100's at 1400, Abit VP6, 2x Corsair 256mb PC150 sticks, 20gb 'cuda ATA-III, 2x 40gb 'cuda ATA-IV in raid 0. 20" Trinitron. No fans
2x 2400+ at 2288mhz (16.0 x 143), Iwill MPX2, 2x Kingmax PC-3200 256mb sticks, 4x 20gb 60gxp in Raid 5 on a Promise SX6000. Asus Ti4200 320/630. Cooled by Water
|