Hi, I'm new to this forum and I'm starting by showing you my watercooling rig.All blocks and memory heat sink are home made.

Water block on chipset and heat sink on memory are because of my hi I/O voltage of 4.07V, yep I know it's high but it got my generic pc133 cas2 sdram to 157MHz cas2.Here is another pic. of memory HSF

. For radiator I use heater core from Lada (Russian car, I figured it must be good because of their cold winters

), I did look at other cars but this one was the best. The fins are copper and dimensions are 25*18*7 cm , that's why I keep it otside my big tower.

. I use two Rena flow 600c water pumps, connected one after another so water flow is the same 600 l/h , but the preasure is doubled.My AMD TB 1GHz Avia week 10 y is OC. to 1570 (10*157)and runs 24/7 Seti if I'm not doing anything, video card is Radeon 32ddr OC. to 200/200, here is a link to big pic. with
Benchmarks ,as you can see it's pretty fast and cool 100% stable.
And here is a little preview of what I'm about to make

btw. Pro Engineer Rocks. Wait week or two max, when I'll have everything made and put together and I'll post a lot of pic. of better quality I hope.
[ 09-17-2001: Message edited by: morphling1 ]